Giqiu homogeneous vinyl floor has been treated without waxing. After the construction and cleaning is completed, it can be used directly. In addition to the necessary maintenance during use, the homogeneous Permeable floor must also be used in some small details in work and daily life.
Considerations
1. All kinds of dirt on the ground should be removed in time.
2. It is absolutely forbidden to soak the floor in water. Although some floors use waterproof glue to cut off the water source (such as floor drains, water rooms, etc.), long-term soaking in water will seriously affect the service life of the floor. Use a water suction machine to suck up the sewage in time during the cleaning process.
3. The maintenance period should be shortened for places with large traffic and people, and the number of waxing times of high-strength surface wax should be increased.
4. It is absolutely forbidden to use hard and rough cleaning tools (such as steel wire balls, scouring pads, etc.). Sharp objects hitting the Giqiu homogeneous vinyl floor should be prevented.
5. It is better to place a foot pad at the entrance of a public place with a high flow of people to prevent dirt, sand, etc.
(1) Clean and maintain for the floor after laying/before use
1. Clean up the dust and debris on the floor surface first.
2. After washing with clean water, soaking dry, it can be used directly without waxing.
Tools: broom and mop
(2) Daily cleaning and maintenance
1. Push dust or vacuum cleaner to vacuum. (Dry the mop and push the dust, or vacuum with a vacuum cleaner.)
2. Wet mopping. (Dilute with neutral floor cleaner 1:20 with water, and mop the floor with a semi-wet mop.) If necessary, you can also use a mopping machine with a cleaner to clean at low speed.
Tools: dust push, mop, vacuum cleaner, cleaner
(3) Regular cleaning and maintenance
1. Push dust or vacuum cleaner to vacuum.
2. Neutral floor cleaner diluted with water at 1:20, mopping the floor or cooperating with a low-speed polishing machine and red polishing pad for low-speed grinding and washing.
Tools: dust pusher, ground grinder, red grinding disc, water suction machine, cleaner
(4) Thorough renovation treatment
1. Push dust or vacuum cleaner to vacuum.
2. Dilute with strong dewaxing water 1:10 and spread it evenly on the ground, wait for 5-10 minutes, clean and dewax at low speed with a floor scrubbing machine and red grinding pad. Use a water suction machine to suck up the sewage in time.
3. Wash with clean water and blot dry until there is no residual detergent on the floor.
4. 1-2 layers of high-strength surface wax or polyurethane coating.
5. If there are many scratches on the original floor, use a floor scrubbing machine and fine sandpaper to polish the floor at low speed, remove the surface layer of the floor as a whole, and pay attention to the uniformity and strength of the polishing. After overall polishing, use a low-speed polishing machine with a red abrasive disc for low-speed polishing. Wash with clean water and blot dry until there is no remaining detergent on the floor. 1-2 layers of high-strength surface wax or polyurethane coating.
Tools: dust pusher, ground grinder, red abrasive disc, water absorber, cleaner, high-strength surface wax or polyurethane sandpaper
(5) Treatment of special dirt
1. Greasy stains: For local oil stains, pour the stock solution of the water-based degreaser directly on a towel to wipe; for large areas of oil stains, dilute the water-based degreaser at a ratio of 1:10, and then clean it with a mopping machine and a red grinding pad at low speed.
2. Black offset printing: use a cleaning agent with a low-speed polishing machine and a white polishing pad to polish. For long-time black offset printing, you can pour the strong black offset remover directly on the towel and wipe it.
3. Gum or chewing gum: Use a professional strong glue remover to pour directly on the towel and wipe off.
Cleaner: Water-based degreaser, cleaner, strong black offset print remover, strong glue remover.
Post time: Jan-20-2021
